Satin Smooth Pebble Hard Wax – Titanium Blue 35oz #SSWBMPG

Satin Smooth Pebble Hard Wax – Titanium Blue 35oz #SSWBMPG

Directions:

1. Prepare the Wax:Pour pebble drops into a metal wax can and heat in a Satin Smooth or professional wax warmer for 20 to 30 minutes on READY.

2. Check Consistency:Ensure the wax is thick with a center island of unmelted wax; sides should be soft.

3. Test Temperature:Dip an applicator into the wax and apply a small amount to the inside of your wrist. It should cling to the applicator; if it runs off, its too hot.

4. Cleanse the Skin :Use Satin Cleanser to clean the area to be waxed.

5. Apply the Wax:With a new applicator, spread a thin layer of wax against hair growth, then back down, leaving a thicker edge for removal.

6. Allow to Cool:Let the wax harden, then quickly pull the strip against hair growth.

7. Remove Residue: Apply Satin Release to remove any wax residue, followed by Satin Cool to soothe the skin.

8. Condition the Skin:Finish with Satin Hydrate to keep the skin soft.

9. Replenish Wax Can:After service, refill with Satin Smooth Pebble Wax.

Cautions:

Risk of burns. Do not microwave. Avoid using on irritated, broken skin, or areas with wounds or varicose veins. Always check that skin is dry and irritation-free before use.